Max-Seal 1000 Acetoxy Silicone Sealant

It is the muilt-purpose acetic cure silicone sealant, used for the sealing on window, door, toilet and other internal decoration

Use For:

1. Window and door frame gaps filling.

2.Kitchen and bathroom decoration.

3. Other building internal decoration.

Good Cohesion For:

Glass

Aluminium

Plastic

Wood

Specification:

Strong cohesion for most of building materials.

Resisting high and low temperature.

Weatherproof

Waterproof

Keeping sealant characters stable in long time.

Packing:

300ml, 280ml, 260ml/cartridge, 24 cartridges/carton, 1900 cartons/20ft container.

Order deliver time: within 30 days after order and relative packing and samples confirmed in the quantity within three 20ft containers.

MOQ: 400 cartons.

1. Description:Max-seal 1000# acetoxy silicone sealant is one part room temperature vulcanized sealant that offers excellent adhesion weatherproof ability and elasticity for generalglazing and or sealing application. After application, the sealant forms a tough rubber with long-term flexibility and durability.2. Characteristic:1) Acetic acid curing system2) It has excellent conglutinate for glass material3) Short sclerosing time, reducing working time4) Good performance of weatherproof5) Not easy for changing yellow3. Function:1) The glass window of aluminous material2) The shop window of the entrance hall3) The laver' porcelain and bathtub4. Common characteristic:Before solidify: 1) Appearance: non-sag paste2) Density: 0.96 - 0.97 (20 degrees)3) Skin dry time: approx. 5 minutes (20 degrees)4) Cure time: approx. 24 hours (20 degrees)5) Drooping degree: 0 MmAfter solidify: 1) Rigidity a type sclerometer: 18 - 202) Elongate ratio: not less than 400%3) Elongate intension: 0.8MPa4) Cutting aluminum intension: 0.8MPaNotes: above data and information are just for reference, not indemnity. If thereis any change, we don't inform5. Application Limit:1) It can't use in the structural decorate project2) It will exude the material of celvacene greases plasticiser or solvent, suchas oiled wood` oily armor plate or not sulfuration latex material3) It can't use in the dusty watery surface4) It can't use on the surface of concrete crude stone material and fictile5) It can't be used on plating membrane glass6. Condition request:Sealant should be in temperature of 5-40°C. It's used under the relative humidity of 40%-80%. Too low temperature will reduce conglutination and it can became frost ice on the low temperature material. It effects the sealant's conglutination. So, the standard using temperature is above 5°C. It is blight for the sealant in high temperature. As a result of high temperature, the sealant will be drooping and expedite solidify time, reducing using and repair time. At the same time, it will bringair bubble. If too low, relative humidity could make the solidify speed change slowly,or if too, high relative humidity could form congelation on surface of material. It affects conglutination between the sealant and material7. Clean process:1) All the material should be clean out, without dust dirt or other feculence2) The scour must be the solvent which has been tested. If use IRA MEK or XYLENE which didn't demonstrate, the latter's toxicity is stronger and the other two are better fitting3) Elementary clean method: first, use the wettish and undepilatory pure-cotton cloth to clean the feculence before the solvent volatilization. It should not dry the solvent naturally. Lest should feculence newly on the material4) For small and deep interface, it needs to clean at full tilt5) The material that has been cleaned out should do with using lacquer, otherwise itshould be cleaned out again. If cleaned surface exposed or in the feculence, it should be cleaned again6) It should be changed the white cloth, which is contaminative, and it should be raved about the impregnant from the container onto the clean cloth and it should not put the cloth into container, otherwise the clean impregnant will be contaminative, it will affect the result7) Since all the cleanout liquid are the tinder and have toxicity, it should have good airiness condition and strictly prohibit fireworks when using them, and adopt necessary safe systemExecutive standard:GB/T 14683-1993Packing: 24 cartridges/carton

Max-Seal 1000 Acetoxy Silicone Sealant